Item Category: All > Miscellaneous
View Gallery
| ITEM # | SHORT DESCRIPTION | LONG DESCRIPTION | QOH | UOM | CONDITION |
| 504068 | POTENTIOMETER, MCDONNEL & MILLER, #110900 | POTENTIOMETERS, COMPONENTS AND PARTS^^ PROPORTIONING SWITCH, BOILER FEED/LOW WATER CUTOFF, MANUAL RESET, FOR M&M #93-7BM, MCDONNEL & MILLER, #110900 | 8 | EA | UNKNOWN |
| 506390 | CYLINDER, HYD, 1.5 IN BORE, 10 IN STROKE | PNEUMATICS AND ACCESSORIES (VALVES, CYLINDERS, FILTERS, REGULATORS, LUBRICATORS)^^CYLINDER, HYDRAULIC, SHOCK ABSORBER. NFPA MP1. 1500 PSI MAX, 1-1/2 IN. BORE, 10 IN. STROKE, 5/8 IN. THREADED ROD WITH CLEVIS MOUNT AND PIVOT PIN. FOR FINE SCREENS. MILWAUKEE CYLINDER MODEL #LH-61. | 4 | EA | UNKNOWN |
| 509325 | VALVE,FLOAT-3/4",THREAD,CLAYTON 8901601 | VALVES AND PARTS,FLOAT^^ 3/4 IN., 125 LB, C.I., THREADED, CLAYTON #8901601J | 1 | EA | UNKNOWN |
| 509561 | VALVE,HYDRAULIC-COUNTER,3/4",FAIRFIELD | HYDRAULIC SYSTEM COMPONENTS AND PARTS^^ COUNTER BALANCE, 3/4 IN. INLET/OUTLET, FAIRFIELD ENG.CO. | 3 | EA | UNKNOWN |
| 509566 | VALVE,HYDRAULIC-4-1/2",PARKER #FM6DDKN | HYDRAULIC SYSTEM COMPONENTS AND PARTS^^ 4-1/2 IN., SPEED CONTROL, 3000 P.S.I. MAX., FOR TARP PARCO CABINETS PARKER #FM6DDKN | 2 | EA | UNKNOWN |
| 512511 | BEARING-5.1250 X 2.3750 X 3.0,TIMKEN SET | BEARINGS,BALL,MISC.,BRAND LISTED OR EQUAL^^ 5.1250 X 2.3750 X 3.00, TIMKEN #299668 & #85923 | 2 | EA | UNKNOWN |
| 514770 | GEAR,WORM,#77(F/L.B. WV600-62 REDUCER) | GEARS,MOUNTED,BRAND LISTED OR EQUAL^^ WORM,#77(F/L.B. WV600-62 REDUCER), LINKBELT #77-0533161-1 | 2 | EA | UNKNOWN |
| 517614 | PULLEY,HEAD,12"X 26"LONG,2-3/16"BORE | PARTS AND ACCESSORIES, CONVEYOR BELT^^ BROWNING,VAN GORP.XT DRUM PULLY D12C26XT25, WITH TAPER LOCK BUSHING XTB25 X 2-7/16" BORE. | 1 | EA | UNKNOWN |
| 518700 | SEAL,OIL,220MM X 190MM X16MM | SEALS,OIL,MISC.^^ 220 MM X 190 MM X 16 MM FEDERAL MOGUL | 1 | EA | UNKNOWN |
| 519332 | SHEAR PIN HUB,11T,NH-78,2-1/4"BORE,NYLON | SPROCKET,POWER TRANSMISSION^^SHEAR PIN HUB SPROCKET, TO HAVE 11 TEETH, TO HAVE NOT LESS THAN 9.26 IN. PITCH DIAMTER, POLYCHEM #661-21321-025, MWRD SPEC #07-03-05-01, 2-1/4 IN. BORE, SOLID 11 TOOTH SPROCKET MANUFACTURED FROM CAST NYLON, PROVIDE NH-78 DRIVE SPROCKETS AS REQUIRED, PROVIDE NH-78 HUB ASSEMBLIES MANUFACTURED FROM STAINLESS STEEL, DRIVE SPROCKET AND HUB ASSEMBLY SHALL BE PROVIDED WITH KEYWAY AND SET SCREWS FOR ATTACHMENT OF THE HUB TO THE REDUCER SHAFT AND 316 STAINLESS STEEL RETAINING RING TO SECURE DRIVE SPROCKET TO HUB. | 19 | EA | UNKNOWN |
| 523724 | RING,RETAINING,F/NSW 150 8X8X17SC PUMP | PARTS,CENTRIFUGAL PUMP,STATIONARY(MISC.)^^ RING,RETAINING, FOR ALLIS CHALMERS NSW 150 8X8X17SC PUMP, GOULDS #52-237-343-001 | 1 | EA | UNKNOWN |
| 524730 | PACKING SET,TYPE 915DN,STRAINER PART | PARTS AND ACCESSORIES,WATER INTAKE STRAINER^^ PACKING SET,TYPE 915DN,FOR AUTOMATIC SELF- CLEANING STRAINER MODEL A-1,SIZE 10 IN., S/N 5891-V, S.P.KINNEY ENG.INC.DWG 23106 ITEM 12 | 2 | EA | UNKNOWN |
| 524731 | GLAND ONLY,S.P.KINNEY DWG 23106 ITEM 15 | PARTS AND ACCESSORIES,WATER INTAKE STRAINER^^ GLAND,FOR AUTOMATIC SELF-CLEANING STRAINER MODEL A-1,SIZE 10 IN.,S/N 5891-V, S.P.KINNEY ENG.INC.DWG 23106 ITEM 15 | 2 | EA | UNKNOWN |
| 524735 | LOCKNUT, S.P.KINNEY DWG 23106 ITEM 21 | PARTS AND ACCESSORIES,WATER INTAKE STRAINER^^ LOCKNUT, FOR AUTOMATIC SELF-CLEANING STRAINER MODEL A-1,SIZE 10 IN., S/N 5891-V, S.P.KINNEY ENG.INC.DWG 23106 ITEM 21 | 2 | EA | UNKNOWN |
| 524740 | MOTOR,3/4 HP,1700RPM,230/460V,TEFC,KINNE | PARTS AND ACCESSORIES,WATER INTAKE STRAINER^^ MOTOR,3/4 H.P.,1700 RPM,TEFC,230/460V.,3 PHASE,60 HZ., FOR AUTOMATIC SELF-CLEANING STRAINER MODEL A-1,SIZE 10 IN.,S/N 5891-V, S.P.KINNEY ENG.INC.DWG 23106 ITEM 53 SPECIAL GEAR ON OUTPUT SHAFT | 1 | EA | UNKNOWN |
| 525370 | FLANGE,IMPELLER,S.S.,WEMCO #71881-1 | PARTS,CENTRIFUGAL PUMP,STATIONARY(MISC.)^^ FLANGE, IMPELLER, 317L STAINLESS STEEL, FOR DIGESTER FEED PUMP H8K-S-H2S, WEMCO #71881-1 | 2 | EA | UNKNOWN |
| 528095 | SHAFT,HIDROSTAL,32"L X 4.5" DIA | PARTS AND ACCESSORIES,CIRCULATING WATER PUMP^^ SHAFT, HIDROSTAL, 32 IN.LENGTH, 4.5 IN.DIAMETER, EJE F 25, 0264042600 | 2 | EA | UNKNOWN |
| 529868 | KIT,REPAIR,SEAL,CHESTERTON #269169 | SEALS, MECHANICAL^^ REPAIR KIT, ELASTOMER, COMPLETE, FOR 221-80 MECHANICAL SEALS ON AN 8 IN. DIA. SHAFT, I.D.= 8 IN., USED ON TARP ITT PUMPS, CHESTERTON #269169 | 1 | EA | UNKNOWN |
For additional information on the items offered for sale, to view items offered for sale, or to make arrangements for pickup of items sold (in person or by private carrier) please contact:
Larry Leszczewicz; lawrence.leszczewicz@mwrd.org (708) 588-3369; or Regina Thornton; regina.thornton@mwrd.org (708) 588-3371. If sending email, please be sure to write iBid on the subject line.
NO CHILDREN UNDER THE AGE OF 18 OR ANY PETS ARE ALLOWED ON THE PREMISES.
Viewing hours are from 8:00 a.m. to 2:00 p.m., Monday through Friday, not less than 24 hours prior to auction closing. Items are located at:
Metropolitan Water Reclamation District of Greater Chicago
Stickney Water Reclamation Plant
6001 West Pershing Road
Cicero, Illinois 60804-4112
THE MWRDGC WILL NOW PACKAGE SHIPMENTS FOR IMMEDIATE PICKUP- EITHER ON PALLETS OR IN BOXES
PAY VIA CREDIT CARD ONLY, WITHIN 5 BUSINESS DAYS OF THE SALE - OR THE SALE WILL BE CANCELLED.
Pick up times for all IBid items purchased from the MWRDGC are between 08:00-11:30 and 12:30-2:30 Monday through Friday.
PRIOR TO PICKING UP YOUR ITEM, YOU MUST CONTACT EITHER LARRY LESZCZEWICZ at lawrence.leszczewicz@mwrd.org (708) 588-3369); or REGINA THORNTON at regina.thornton@mwrd.org. TO SCHEDULE A PICK UP TIME FOR YOUR ITEM. YOUR ITEM MAY NOT BE AVAILABLE FOR PICK UP IF YOU DO NOT PRE-SCHEDULE A PICK UP TIME.
The person(s) picking up the items must present a valid drivers license and proof of insurance.
All item(s) must be picked up NO LATER THAN 30 days after the auction closes. If the item(s) is not picked up within 30 days, the buyer will forfeit their payment for said item(s) as liquidated damages. The District reserves the right thereafter to re-auction or scrap the item(s), for failure to comply with pick up procedures as stated
Pick up in person or
Approved Shippers:
1.) Craters & Freighters – Ship and Package
sochicago@cratersandfreighters.com
Ph (877) 278-6378
Fax (815) 609 -7203
Contact: Jackie
2.) Pak-Mail – Ship and Package
6450 College Rd, Lisle IL
Ph (630) 355-5020
Fax (630) 495 0417
Contact: Sam
3.) Con-Way Freight – Shipping only / must be in a box or on a skid
Ph 800-897-6152
Fax 773-523-1285
Contact: Rich Sheri
4.) Navis Pack & Ship of Chicago- Ship and Package
Phone: 773-313-1640
Fax: 773-313-1604
Contact: Mike Robertson
UPS & FEDEX also may be used. The successful bidder will be responsible to provide MWRD the proper UPS/FedEX Shipping Label and a copy of the iBid receipt via E-mail, Facsimile or a call tag from the driver of UPS/FedEx before MWRD can ship the package.
MWRD contacts:
Phone: 708.588.3366 or 708.588.3369
E-mail: mary.kolinski@mwrd.org or lawrence.leszczewicz@mwrd.org
Fax # 708.588.4092 or 708.588.3378
Local FEDEX office information:
FEDEX Kinkos
1720 N Harlem Ave
Elmwood Park, IL 60707
(708) 453-0009
(800) 463-3339
(708) 453-0269 - Fax
Local UPS office information:
The UPS Store
7301 W 25th St Ste B-20
North Riverside, IL 60546
(708) 442-9039